On #10, we started running the lateral lines that feed the individual sprinkler system. This is the last step of the new system. We plan to knock at least one hole out per week, provided the weather is reasonable. The sod is cut and set to the side while a trencher creates a 18" ditch to house the 2.5" HDPE pipe. These lateral line tine into the main irrigation line that we've been working on since Thanksgiving. That portion of the project is complete. All isolation valves are also in the ground.
Note, the #15 pond is now full of water (below).
On the 8th hole, the new culvert which crosses the approach is installed and we are wrapping this project up.
Above and below are the final two directional boring installs we have to do. By the end of the day, we will have the pipe in the ground from the security shack over to #10 tee. This boring machine saved us from having to disturb landscaping and asphalt parking lots in order to get a 12" pipe in the ground. The final boring location below, connects #10 tee to the the area in front of #1 tee. The diameter of that pipe is 8".
Finally, here is a pretty photo of the Clubhouse I took while my drone was up in the air.
The forecast for Sunday's snow event is all over the place. Some say 4-8", others say 8-12" and then there are even some predicting in excess of 20"! By tomorrow night or Saturday morning, highlandsweather.net will have their prediction posted and they tend to be most accurate.